Recent content by FishFart

Will try that, thanks!

Hello! My mother's Clio 3 (2011) 1.2 16v / 75hp recently had problems with ignition (as if bettery is dying, but it is 1 month old). Also the throttle response was a bit lazier than usual, with idle working at approx 625 rpm. Connected to mechanic's OBD, the throttle body showed some error...

@R27SG do you have some more pics, perhaps from side, with your white 197 and red allegeritas, please?

Problem seems to be resolved now, and car works fine! After the radiator fan was replaced and all the above, after some days I went to get my map back and got it fine-tuned. Was driving the car on track this Sunday and everything worked perfectly. Let's consider this issue resolved, and hope...

Awesome video!

Yea I searched but cannot find :( do you maybe have the link?

Hey where did you get the gas pedal plate like this? Custom made or?

Some new things came up. The problem with overheating was dead cooling fan. As I described above, the idle (with and without AC) worked perfect, no RPM drops, no choking. After 15 minutes drive on way to home, engine overheat happened. So today I took the car to the garage again, really...

Thx @Foxspeed , thermostat failed already about 1 year ago, and was replaced (had problem with engine showing as if it never gets properly warmed up). Is it possible that the new one fails so quick again? Haven't done more than 4-5000 miles since then. Also can it cause this slight idle drop...

Ok so another map sensor was placed in (yes, previous "good" one used didn't work), and together all the electric connections were cleaned at the same time, and now the car turning off while RPM drop is not happening anymore, but another problem happened a moment later. I just took the car out...

@Foxspeed it has been mapped and had this issue but then stock map was placed in for test purpose but it is still there. Was massive flat spot from 2500-3000rpm (even after remap) which is known to happen when precats are deleted or cats are removed, specially with Toyosports manifold (and I...

@Yiannis197 you had some similar problem back in 2014 from what I've seen by checking out your thread. Do you have any input? Check videos above pls! Thx!

New cam sensor was placed today, the problem remains -Crank sensor re-check / cleaned all related parts -Compression check, all good -Wiring / electrics all checked -Engine timing/cams re-checked, all perfect -All pressures good -vvt solenoid good -vvt pulley good -And from before: new sparks...

Ok so I have the crank sensor replaced with new one, still all the problems are there. Got the car's electrics check out at professional mechanic for car electrics, and it all seems fine. Tomorrow I will go to check further stuff, I got some input that there might be problem with cam sensor or...

@R27WTF any update on this?