Search results

  1. jaggeler

    Cruise control and limiter

    It‘s working fine! Thanks for the information here.
  2. jaggeler

    Cruise control and limiter

    OK, thank you! Then the plug in the yellow circle must be the right one. It has 10 pins and in row 1 are three pins free. 86M green is #1 86G orange is #2
  3. jaggeler

    Cruise control and limiter

    Can someone confirm that this is the right plug (1519) to connect the cruise control? green and orange cable should be 86M and 86G?
  4. jaggeler

    ex Nimbus r27r #2054

    I have done more or less the same roadtrip mid of june - would have been a big surprise to meet so much Renault Sport People on Gaviapass or Stelvio!
  5. jaggeler

    Trackspec Clio 197

    Try this one: http://www.clio197.net/threads/trw-slave-cylinder-robust-design.55603/#post-626795
  6. jaggeler

    TRW Slave cylinder - robust design

    The left one is to inspect the clutch disc trough the pressure plate (hope that's the right word for the part with the spring) and the right one is to inspect the slave cylinder.
  7. jaggeler

    TRW Slave cylinder - robust design

    I drilled a 5 mm hole into the bell housing.
  8. jaggeler

    TRW Slave cylinder - robust design

    I 'm using the LUK and can't recommend it because it's also a plastic housing and by inspecting it with a endoskop I saw that the rubber boot is in bad condition after 10.000 km of usage.
  9. jaggeler

    TRW Slave cylinder - robust design

    There is a slave cylinder from TRW (part#: PJQ192) with alloy housing what should be more robust than the original Valeo plastic part.
  10. jaggeler

    Michelin pilot cup 2's....

    http://www.touristenfahrerforum.de/forum/showthread.php?t=108570&highlight=cup+flanke
  11. jaggeler

    Michelin pilot cup 2's....

    Yes it is a known issue! In the german Toristenfahrerforum some guys reported about the same failure on different cars.
  12. jaggeler

    Michelin pilot cup 2's....

    I think Michelin know's the failure mode that happened to Peter's Michelin and therefore they recommend these high pressure values to reduce the load from the tyre's shoulder. The crack of the humb is often seen with cup's on the ring.
  13. jaggeler

    Michelin pilot cup 2's....

    It's a full fat with CUP Pack, Colour Pack, Recaro seats, Keyless, Akrapovic EVO, Front brake w. Brembo HC / Ferodo DS1.11, Rear brake w. Ferodo DS Performance pads, KW Clubsport, Cup 7.5x17 w. Federal RS-R 215/45 17, LiFePo4 battery 1.4 Kg, Wavetrac LSD, Wiechers rollbar, Powerflex bushings for...
  14. jaggeler

    Michelin pilot cup 2's....

    If you want to go to the ring I would recommend Federal RS-R if the weather is not to hot. I compared it to AD08R / Hankook RS3 / Bridgestone RE070 / Kumho KU36 and the fastest Lap was with the Federals. or If you want to go to a semi - some friends tried the Nankang AR-1 on the ring but...
  15. jaggeler

    Which lightweight battery? pc680 v varley red top 25??

    I'm running a 1,3 Kg LiFePo4 battery and it's working fine: http://shop.i-tecc.de/lifepo4-starterbatterie-lifeenergy10000-12v-10ah-balancer-inside.html (sorry for the link to a german page) This battery has A123 Cells which are also used in the liteblox batterys.
  16. jaggeler

    New mods for 2017!

    More sticky rubber and some testing with decoupled ARB to fix understeer
  17. jaggeler

    O.Z. Ultraleggera 8x17 offset 55

    I can't find this wheels. Is it possible that they are not longer produced by OZ?
  18. jaggeler

    LSD Fitting

    I learned that it has to be 130 Nm
  19. jaggeler

    LSD Fitting

    I'm fitting a Wavetrac LSD. Can someone give me the torque value for mounting the final drive ringear to the LSD.