Uprated fuel pump?

[R27WTF]

Hi I’m after an uprated in tank fuel pump for my meg conversion

Can anyone recommend one or got pics of fitting one?

I know I could run a swirl pot set up but I don’t really want a noisy external pump though


Sent from my iPhone using Tapatalk

 

[Sean197]

Megane 225 pump can be made to fit, have a look at @A1axx's thread. I believe rs tuning use the walbro 255.

 

[R27WTF]

What’s the flow of the 225 pump


Sent from my iPhone using Tapatalk

 

[turkie172]

Well if the pump is called Walbro 255 I would think 255 Litres per hour a google will confirm

 

[R27WTF]

I gathered that I was asking about the Megane 225 pump what that flows to as I have one of them


Sent from my iPhone using Tapatalk

 

[turkie172]

Sorry my mistake

 

[A1axx]

225 pump is about 110lph, clio is 90

 

[R27WTF]

225 pump is about 110lph, clio is 90

Probs better off going with Walbro or something then


Sent from my iPhone using Tapatalk

 

[A1axx]

Probs better off going with Walbro or something then


Sent from my iPhone using Tapatalk

Lots of people run decent power with the standard pump. The issue isn’t the pump it’s the dog [emoji90] returnless setup.

Either 225 or walbro, but mod the system for return

 

[R27WTF]

Lots of people run decent power with the standard pump. The issue isn’t the pump it’s the dog [emoji90] returnless setup.

Either 225 or walbro, but mod the system for return

That’s what I was going to do rerun set up with an adjustable regulator on the return side of the fuel rail


Sent from my iPhone using Tapatalk

 

[A1axx]

That’s what I was going to do rerun set up with an adjustable regulator on the return side of the fuel rail


Sent from my iPhone using Tapatalk

Fixed 3.5 bar reg is a good bit of kit, get them from burton

 

[R27WTF]

Fixed 3.5 bar reg is a good bit of kit, get them from burton

Have you got a link


Sent from my iPhone using Tapatalk

 

[A1axx]

Have you got a link


Sent from my iPhone using Tapatalk

http://www.burtonpower.com/weber-alpha-fuel-pressure-regulator-3-5bar-blue-wfr535.html

I have a new sytec adjustable one in a box if you are dead set on using one, but il be going for this unit, compact & guaranteed pressure

 

[R27WTF]

Is 3.5 bar right when running the 250 engine and 250 inlet?


Sent from my iPhone using Tapatalk