Thanks for in depth reply Rich. Great advice there, that I'll definitely put to use. I've decided that this seat is pretty old and probably not worth putting in right now, so I'm going to hold off until I get something better than the recaros. Thanks again!
Sent from my iPhone using Tapatalk
Just wonder if anyone has removed their lower control arms before? I need to get them out to fit a set of PF camber bushes and would love a bit of guide as to the easiest way to go about it. Do I have to drop the subframe, or can this be avoided? Any help would be greatly appreciated!
Thanks...
Hello,
I have been given an older fixed-back racing seat made by an Australian company named Velo. I'm trying to find an easy(ish) way to mount it, that will allow me to relatively easily swap between my stock recaro and the fixed seat for track use. The seat uses side mounts from what I can...
Will definitely be considering a set of 03G's for my next set of semi's. They are quite expensive though. I just missed a set of brand new hankook's the same as Steve's for $150/corner!
Sent from my iPhone using Tapatalk
Would love to hear it when you get a moment! I wonder if there's any easy way to relocate the battery... That's the only hint holding me off pulling the trigger right now!
Sent from my iPhone using Tapatalk
What intake and semi's are you running? I'm thinking if an R3 setup from Flacsi on here, and my RE55S semi's are coming close to the end of their life as well. Congratulations, that is an amazing result!
Sent from my iPhone using Tapatalk
Wow 3-4K!! I was thinking 1.3k ish for the diff landed and 1k absolute tops to fit it. Possibly not. And also very jealous of those top mounts... :(
Sent from my iPhone using Tapatalk
Out of interest Rick, who did you have install it and roughly how many hours did they quote? If I could do it myself I'd buy one in a heart beat to reduce costs
Sent from my iPhone using Tapatalk