Search results

Ill take my diffiser off tmoz n dive it for the day, that will rule it out

Hi did you manage to solve the rattle as iv got the same problem as soon as the exhaust gets warm it rattles on the heat shield that's fastned to the diffuser, does it really need the shield or can I replace it with stick on stuff ? Cheers

Did anyone get to the bottom of this mines doing exactly the same the engine just kind of dies I have to drop down the gears to get the revs to lift like in driving up a massive hill or something but if I turn it off and re start whilst still rolling it's back to normal it's really strange, no...

I made some of these, I used an 8mm round bar I ground one end taperd down to 4mm then drilled a 2mm dimple in the end of it, it's brilliant for getting the pins started as it won't slip and chip the caliper paint, then a normal pin punch to tap them the rest of the way

Seen it a couple of times in the past few weeks around swillington & allerton bywater

Put me down for one too please, also how do I pay its been a while since I was on the site so I'm a bit out of touch, cheers

Iv decided on eibach as it's only 25mm difference so hopefully it won't make the already harsh ride any more uncomfortable lol, a job for after the honeymoon now tho along with rear brakes, after owning this car 2 years iv noticed there quite expensive to maintain for an everyday run around, the...

Also has any one had any issues with the wheels catching with the car full ? It's just on standard cup speedlines with standard size tyres, thanks. It's looking like eibachs atm

Right so on Tuesday I was replacing my front pads and cleaning the discs&calipers up when I noticed the NSF spring has broken, I wanted to keep the standard set up even though it is a little stiff but I'm stuck on deciding what I want to do, I wouldn't like to replace just one side with a new...

I'm going to put a washer at each side of each nut that will give it 13mm lift at the rear if I like it I'm going to make my own spacers from round aluminium bar and get some high tensile bolts to keep it rigid and secure

Have now, opinions welcome

I'm trying some atm, still unsure if I like the look or not I just pressed 2 m6 nuts into an m10 nut and then drilled the threads out of the m6 nuts with a 6mm drill made four of these and fitted longer bolts, bonnet locks down and releases perfect, it's only a small lift though so it looks...

Also Thers no messy wires and splicing looms like on the meg conversion, once you start choping into looms and joining wires your asking for trouble IMO,I get what mats saying if you've looked after your engine and serviced regular etc you know everything's ok and trust it's reliability, yeah...

I'd looked into this rather than the meg conversion it's different and uses all new parts, if it's been out a while on the 172/182 I can't see it needing much ironing out either, I think I'd choose it over the meg conversion just to be different and against the grain lol

I thought the kangarooing was down to traction ctrl it's the affect it gives when your trying to accelerate in low gears when the wheel slips it cuts power until it stops then comes off but you've still got ur foot down and it tries to slip again giving the juddery effect, have you ever noticed...

What's the flat spot like, when I choped the standard system it was horrendous more like a flat patch so I opted for the miltek system but I miss the pops n crackles :-(

Hmm interesting I'll keep my eye on these

I was playing with a code reader the other day I unplugged a coil to get a warning up at first it said check ignition and then the light came on, sounds like the same symptom realy slow to rev up and massive lack in power, worth a quick check if you've been cleaning round that area .

That's the overall problem I think, "treat every one equal" "were all the same" but here's 2 different shops for you different people to shop at haha it's an absolute joke, same with girls n boys we want equal rights but we also want cheaper car insurance and 50% of our partners income if...

Too many softy do gooders about trying to look good + caring, I think it's horrible that we get things taken away from us because others don't want them, I don't like salad so I don't go to salad bars I don't try and banish them from the fkn globe or change them to bar/grills I just go to the...