Search results

Hi, those of you with KW V3 coilovers i cant adjust the bump on the rear shocks, do you need to take the load off the shocks before adjusting? or are they as i suspect seized up. I've cleaned out all the dirt, and sprayed a lot of GT85 onto them but no luck so far. Rebound adjust on the top is fine.

Can anyone who has direct to floor side mounts for bucket seats tell me the height from where they meet the floor to the top hole centre? I currently have a mix of base mount/side mounts but its too low for me, and I already asked Pure motorsport but theirs works out lower than my current...

Hi, when using the cup racer ee brackets for extra track width etc, i believe you need to use driveshafts roughly 25mm longer. Buying shafts is an option but expensive so wondering if there is any off the shelf parts that could make up suitable shafts. I wouldnt be surprised if it was shafts...

hi guys I started my track car build wel over a year ago and the car is stripped, no airbags, fixed buckets and has safety devices half cage and harnesses done to msa standards. It will be finished soon and will need an mot, has anyone had issues getting an mot recently with a similar setup?

just started taking the front brakes apart and having some trouble getting the pistons out. I don’t have compressed air to pop them out anyone got any tips or tricks for getting them out?

Hi has anyone got measurements for the inside of the standard wheels for brake clearance? Or the size of disc/ calliper assembly? My cars in bits and I don’t have any wheels at the moment to take measurements and want to make sure new wheels will clear the brakes!

Had a lot of oil pooling on top of the lower half of the inlet manifold and around he injectors, found its coming from around the camshaft sensor, there doesn’t look to be a seal on it when I took it out, should there be? Has anyone had this and sorted it? The sensor is working fine I just...

I’ve got my engine and box out at the moment doing various things including fitting an lsd. I want to do flywheel and clutch aswell, haven’t bought anything yet so interested in which is the best in terms of lightness and cost etc. My car sees minimal road use and is more geared for track use...

hi, I’m in the process of pulling my engine/gearbox out, the passenger side driveshaft won’t come out of the gearbox, the workshop manual refers to a clip removal tool but I’m not seeing anything when looking at the shaft. Is there anything or do I just need to give it a good tug lol.

Bought this car late 2015. Its a FF cup, recaro's, yellow interior pack, already came with KW v3 Coilovers and Geo setup by Mark Fish. Since then its mostly been a van whilst the other half surprised me by moving into my house and wanting the garden done.... Thankfully Van duty is now over...

Hi guys, I've received my safety devices cage from Mark Fish, its the rear RO20 one with the harness bar. Does anyone have any photos of the fitting process? i'm just not sure where the various smaller re-enforcing plates go etc.

Hi, i'm struggling to find where I can get a pair of foglight blanks for my rs200, I never use the driving/fog lights so took them out, what do they use on the cup models? Cheers!

Hi, one of the front springs on my kw v3's has snapped, just wondered if anyone had dimensions of the springs so I could cost alternatives. Going to call KW uk tomorrow and see what they will cost from them. There must be some irony in the first part to fail on my French car being the part...

Hi, have read several times that the clio 197/200 cup wing does nothing other than add drag. Would appreciate any info people have on this as my car has the wing, sources, facts etc, so would like to know if its worth it or not.

I have a momo tuner steering wheel, 320mm version from a previous car i'm interested in fitting to my rs200, what options are there for a boss? seems to be a few options around and am looking to keep cost to a minimum, I want to keep the wheel about the same place as the stock wheel is, and...

Hi ,bought my clio late last year, and signed up a little while ago but just getting round to posting now lol. This is my clio. Absolutely love it!. It has a few mods : KW variant 3 coilovers 20mm spacers k-tec induction ultra racing rear strut bar

Hi has anyone any experience with the RStuner map from fastchip on the clio 200 rs, I can find plenty of opinions regarding the 197, but not for the 200, as they have a different map from the factory I would appreciate the feedback. Just looking for feedback on whether it makes much...