Search results

  1. LB197

    197 Lux Project

    Got a bit fed up of these door rubber strips, even bought some genuine ones and still fell off. So just got some cheap door seal tubing off eBay and works really well.
  2. LB197

    197 - 3D Printing Ideas

    Some setup that, i dont think my girlfriend would let me get away with it though [emoji23] ive just about got printer in the house haha. I’ll give abs a whirl next then, the PLA has held up under the bonnet but i reckon in the summer it’ll do a flop [emoji23] ive had a few things even small...
  3. LB197

    197 - 3D Printing Ideas

    Thanks, im doing a few tests with it. Few bits in the garden to test how it handles water when it’s printed and a couple of bits to test the heat, more so i know myself what i can get away with like. I wanted to bend something and only took minimal heat to bend I’ll get a couple more reels at...
  4. LB197

    197 - 3D Printing Ideas

    Good shout, should be able to get something together for that. Mine isn't too bad as I just gave it a wire brushing and sprayed it. Yeah, that's something I've thought about, it's just how to go about it as they would still need to be quite deep or I'll get my toffee latte everywhere like it...
  5. LB197

    197 - 3D Printing Ideas

    So after some meddling round, ive got the hang of fusion 360 and cura suj thanks for that recommendation saved me searching for and trying other free options. Turned out to be an ender 3 pro, so has a few benefits over the 3 at least. Made a few little house bits and then wanted to move onto...
  6. LB197

    197 - 3D Printing Ideas

    Perfect! Thanks for that, I'll have a look. Totally understand on the "not want to give away hard efforts", worth an ask though haha. It's an Ender 3, that someone I know is getting rid cheap, so not super current but good to get a feel for it. I'll have a play around and see what I can come...
  7. LB197

    197 - 3D Printing Ideas

    -- If this post belongs elsewhere, by all means move to where it should -- Hi all, Should be getting a 3D printer in a couple of weeks and wondered if anyone has any images of past Clio bits they've done. Got a few ideas myself but would be good to see other ideas. Cheeky question, but if...
  8. LB197

    NG 197 with R27 Kit

    With the RS kit, I just bought the front lip from Renaultpartsdirect, someone may have just done that but got the whole kit. I've also always had good experiences with Diamond Motors.
  9. LB197

    197 Lux Project

    Been a long time since I was on here but thought id add a couple of phone pics, made a few changes and cleaned the callipers as best I can, mainly going from the K-tec cup replica spoiler to a GT spoiler (Wrapped it black to match, as I wrapped the roof last year but thinking of taking that off...
  10. LB197

    197 - Check ESP / Check ABS

    Many thanks for your comments, got the parts and took it to a garage, far too bloody cold to be outside [emoji23] he showed me the old one and had a huge hole in it. Got both sides to be on the safe side.
  11. LB197

    197 - Check ESP / Check ABS

    Thanks for that, hoping its not a case of having to replace the rear disks again. Far too cold for outside tasks, I'll take it to the garage :tearsofjoy:
  12. LB197

    197 - Check ESP / Check ABS

    Hi guys, just driving along today to the shop and had both the ABS and traction control lights come on and also the messages on the speedo screen saying check ESP AND Check ABS, its had new brake disks all round about a year ago so the only thing i can think of is theres crap on the abs rings on...
  13. LB197

    Clio 197 Graphic (Poster)

    Hi Guys, thought i'd share something i've made recently, slightly different style to the norm.
  14. LB197

    197 Lux Project

    So after a year of ownership I’ve made a few changes here and there and with my old thread images breaking i thought id start a fresh. So this is my Clio 197 Lux, judging by the how many left site theres only around 20 of these left on the road. You probably know the differences in these...
  15. LB197

    Middle section delete - is it worth it?

    It's something that i keep coming back to and wanting, the main worry is that its going to be quite loud inside the car, my 182 was just silly haha.
  16. LB197

    Middle section delete - is it worth it?

    Ooo, this flat spot that people talk about, is it really noticeable and what does it entail? Also is it quite loud inside the car? Thanks
  17. LB197

    Middle section delete - is it worth it?

    Hi Guys just after a bit of advice, so i'm after a bit of noise from my 197 but don't want it ruining my life. So i've been looking at removing the centre section, ive heard about there being a flatspot but realistically how much does this affect the driving experience? Also does this make the...
  18. LB197

    197 leak??

    I’ll leave it off for a few days and see if it stops [emoji846]
  19. LB197

    197 leak??

    Hi guys, this maybe a silly thing but just thought id check. So last night i noticed there was a puddle under my 197 and passed it off but then its just happened again. The puddle just looks like clear water, doesn’t smell or have any colour and is coming from underneath inline with the gear...
  20. LB197

    What do you do with this bit? Air intake

    Thanks for the reply, ive changed head gaskets and all sorts, but only really ever worked on older cars which dont have many sensors and things, just thought id ask before going ahead Sent from my iPhone using Tapatalk