Rear Caliper carrier bolts

jimmybeattie

Paid Member
When removing the rear brakes on my 197 I noticed the Caliper carrier bolts are pretty rounded. Any idea where I can get replacement stuff or what size i should be searching for?
Thanks
 
You need to confirm which bolts the ones that hold the frame/carrier to the axle or the bolts that hold the brake calliper body to the carrier. Or the slider pins hex 1,2 or 3
upload_2019-1-18_19-56-15.png
 
  • Like
Reactions: Big Ben
Sorry yes I should have been more specific. I am after the ones that hold the carrier to the axle so number 1 in your diagram. Thanks
 
Slide pins no2 from picture are not the same.
How to know who is up, and who goes down.
I rebuild my rear calipers, but i not pay attention when I took off.
Sorry for my bad english.