Search results

Not it’s standard, I only fitted all the solid mounts this week, it was doing the knocking before I fitted these so I know it’s not them. Airbox, suspension even the exhaust is standard. Could be a knackered shock. I plan on keeping it standard, maybe a few light mods as it’s my daily car. I...

Right, just tried that and nothing

Running solid stabiliser mount, solid dogbone mount there’s no play in the engine. I think I it may have to be shock or mount

There’s no movement in either wheel if I try and wobble it. Literally nothing, there was slight play yesterday until we replaced all the parts we did

Yeah good point, it doesn’t always happen when pulling away, but I can get it to happen, if I get the biting point right on the clutch, then I can engage and disengage and make it do it if you know what I mean

Cheers dude, that’s quite helpful. Today I done a few bits both the track rods, axle joint and plastic bush, nsf lower swivel joint, put it all back together, wobbles the wheels and there was no play there at all (4 post ramp) went and had the wheels aligned, had it up on their flat ramp, still...

Guys I’ve been doing a bit of reading in the famous nsf knock. Mine has it, today the track rod end, the track rod axle joint, and the bottom ball joints were replaced, and somehow the knock as got worse. What else normally goes on these?

Hi guys. Looking at swapping all the silver trim on the 197 dash for carbon stuff, found most things but struggle to find the actual surround for the radio and and blower controls. Anyone know where I can get one? And point me in the direction of more carbon parts

Yeah I’ll have it on the ramp later. It had a lower ball joint fitted for mot. It’s only at speed under acceleration. SLOW corners it’s fine

Hello guys, just a quick one. Just took the 197 out for a spin, and I noticed that going around a left hand corner under hard acceleration there seems to be a slight judder from the offside from wheel. If I accelerate into the corner and let off the throttle it’s seems ok. It’s just under...

Thanks guys. Yeah it is a fun little thing. Love it to bits

Yeah speak to him a fair bit. Good lad

Ahhh mr grimley

That’s my target. I’ll be dissatisfied if I don’t get there. Yeah maybe I’ll bring this too a meet

Former owner done the body work. I’ve done interior, wheels, engine work and what not. Was a standard f7r which was rebuilt by previous owner, I’ve since got another f7r, with cams pulleys and headwork to go in, then I’ll bolt on the jenvey itbs and omex and get it remapped. Changed all the...

Hi guys, fairly new to the forum, was asked by a fellow member to post some more pics up of my mk1 clio 16v. So here you go

I’ll post some picture up shortly dude, keep your eyes peeled

Cheers folks. I’m not gonna lie I prefers the mk1 as it’s much more raw. But I’m very happy with the 197, the handling is spot on, can’t fault it at all

Few subtle mods New splitter Wind deflectors Induction kit Few other bits need tarting up. Drivers seats isn’t worn but I’m gonna get a new one. Door handle silver has work a bit, so new ones of them. Couple of stone chips on the bumper. So I’ll get that resprayed

Cheers mate