Auto Finesse Iron Out?

[hodge]

Morning lads n lasses, i have just received a bottle of Iron Out and am a bit unsure on how to use it, do i wash then dry the car b4 applying the product, then rinse? Or wash n leave the car wet? Or no wash just spay the stuff on?

As you can tell old age and confusion have set in any help gratefully recevied.

Cheers

 

[smoggy mark]

Morning lads n lasses, i have just received a bottle of Iron Out and am a bit unsure on how to use it, do i wash then dry the car b4 applying the product, then rinse? Or wash n leave the car wet? Or no wash just spay the stuff on?

As you can tell old age and confusion have set in any help gratefully recevied.

Cheers

Now mate!I would wash and rinse quick spin round the block then bang on the Iron out lightly rub in with a sponge leave for 5mins until you can see it doing its job then rinse and dry.

 

[GrumpyTwig]

If you use it the same a ironx I usually:

Snow foam
Pressure wash off
Snow foam
Pressure wash off
Leave for 5 minutes

IronX, leave it for a bit but make sure it doesn't dry.

Wash off.


Rarely need to actually agitate it though, usually just does it's job well enough without touching.

 

[hodge]

Cheers lads, just need it to stop snowing!!!

 

[Mentalpen]

Foam, wash, dry, tar remover and iron remover one after the other ensuring they don't dry and agitating as required, foam and rinse, clay, polish, protect.

 

[hodge]

is the foam part needed as i no have foam, just garden hose n buckets

 

[Mentalpen]

No, it's just a pre and post wash.

Pre to help remove dirt and post to neutralise and remove the tar/iron remover.

Just wash it after using them.