Recent content by cdunn

I did yes... the fuel pump had died completely... so got an updated Walbro one fitted. The half a day having the car back... the hard plastic nylon line from the sender unit to the fuel line burst under the pressure... so at present I’ve managed to salvage the old tubing from my old pump to...

I'll give it a go and see what happens anyway. Any idea on the above sensors/fuses location in the engine bay etc?

Hi all, As the above states, car is not firing up. The car turns over however does not fire. I have read a lot about power to the Fuel pump however also the TDC sensor, Crank Sensor and fuses etc. Before I bite the bullet and order new parts, can people advise on how to check the sensors and...

+1 to these mounts. I actually bought Sean's toyosports manifold from him and fitted these two mounts also. Made a big difference. Recently had the Powerflex gearbox mount and upper engine mount fitted also just to make it even more solid. Would highly recommend all four mounts if you wanted...

Adding a second bump, just had the Gearbox mount and Upper Engine mount fitted also. Car is now solid with hardly noticeably less low end vibration. Definitely recommend upgrading all four mounts when swapping out the OEM manifold

Gonna bump this post, bit old but time has been at a premium since! Had the manifold fitted about a week ago with upgraded upper torque mount and lower engine mount.Vibrations are noticeably higher at idle and lower revs however mid range to high revs car sounds and feels much more solid and...

Awesome, I'll drop him a line soon. Cheers for the help

Morning all, After scouring the forum for rear brake discs suppliers, opinions etc I've seen lots of people go for MTEC front and rear discs. Now, not sure if I'm going blind, however do MTEC not sell the rear discs any more...

Hi all, That's awesome cheers for the help. Was unsure seeing as it was an aftermarket part. Thanks for the help

Hi all, Bought a toyo manifold off of a friend as it was more convenient (and cheaper) than buying new. Only issue is the gasket is a bit bent, split etc. Is it possible to just buy the gasket for the toyo manifold or if not can a gasket be repaired (bare in mind i'm not exactly mechanical)...

Yeah i need the lower ball joint and have just realised my mistake with the part number! ok though i'll have another hunt around and where is cheapest! Anyone have the correct part number while i'm here?? cheers

Hi all, Just had my 197 recently MOT'd and had confirmed that the lower ball joints on both sides need replacing. Something i knew anyways! Anyone know where i can get some from though as been looking on forums and lots of people advised rsport in wimbledon but they're only selling to...

hi mate sorry for the late reply. Unfortunately only found one on amazon however was more expensive than the headunit!! was prepared to be paying that much!! eventually bit the bullet and got the connects2 adaptor instead and that works fine however no display of course

Hi all, As the title states can anyone advise of a supplier who can supply the above cable however not massively keen on the price tag!! I read on here that some people have found them on ebay for around £30 which would be a bargain!! Any help appreciated, Cheers

Awesome thank you for the help!!