Seat mounts

[Rallyreason]

What is everyone using to mount their bucket seats?

Also best place to buy torque mount and lower engine mount bushes

Thanks in advance

 

[r&skxa]

I have these for my Sparco Revs
http://www.ebay.co.uk/itm/RENAULT-C...872316?hash=item4b128e71bc:g:4tYAAOSwOyJX-16G

Engine dynamics were the best price for Powerflex mounts. Make sure you have the discount code though. Email them and he will give you a code to register with and 90% of the prices change

 

[Rallyreason]

I am hoping for something a little cheaper to be honest.

Thanks for the info on ED. i didn't know that.

 

[Rallyreason]

Just looked on their website and it says the club should have a discount code?

 

[PAUL JA]

Rentune do a side mount that bolts to the floor so no subframe required (obviously you would loose the slider)

https://www.facebook.com/rentune/ph...5536779595476/722431281239357/?type=3&theater

We used the OMP subframe (which are POOP) and steel side mounts, we would have used the Rentune item if it had been available

 

[A1axx]

Cup racer side mounts



_________________________________
GW 197 ex Michelin Road Cup Racer -> Track car/Sprints

http://www.clio197.net/threads/gw-197-ex-michelin-road-cup-racer-track-car-sprints.53560/
_________________________________

 

[Christopher]

I have Sparco subframes and OMP sidemounts. Plenty of adjustment but they're fixed once you've set them.

 

[r&skxa]

Rentune do a side mount that bolts to the floor so no subframe required (obviously you would loose the slider)

https://www.facebook.com/rentune/ph...5536779595476/722431281239357/?type=3&theater

We used the OMP subframe (which are POOP) and steel side mounts, we would have used the Rentune item if it had been available

Why do you think they're "poop"?

 

[PAUL JA]

Why do you think they're "poop"?

Basically because the holes in them don't line up with the side mounts and they don't put the seat on the centre line of the steering wheel. We have drilled a few extra holes to try and correct this

 

[r&skxa]

Basically because the holes in them don't line up with the side mounts and they don't put the seat on the centre line of the steering wheel. We have drilled a few extra holes to try and correct this

Oh ok. I've I'd them fitted along with sliders but haven't sat in them yet. That should be interesting if I'm driving it facing the wrong way

Sent from my SM-G935F using Tapatalk