Good day All
I need some advise please , About 2 weeks ago I was driving and squirted water on my windshield to clean the window , smoke suddenly appeared to be coming from the wiper stalk. I pulled over and turned the car off and the smoke stopped , I then turned the car back on again and the smoke started again and then heard the Wiper fuse pop. I have taken it all appart , cleaned as much as I could and put it all back together but closed off the 4 pins that connected to the board with some electrical tape. Now everything seems to be working BUT just wondering what connectes to those 4 pins ? Any advise ?
I know that there are 6 wires going in to the stalk , the 2 middle ones are for the horn but then it has 2 set on either side.
 

Attachments

  • s-l1200.jpg
    s-l1200.jpg
    115 KB · Views: 8
  • WP_20160822_019.jpg
    WP_20160822_019.jpg
    66.3 KB · Views: 7
  • WP_20160822_013.jpg
    WP_20160822_013.jpg
    50.6 KB · Views: 7
  • wiper stalk 4.jpg
    wiper stalk 4.jpg
    49.8 KB · Views: 6
  • wiper stalk 3.jpg
    wiper stalk 3.jpg
    53 KB · Views: 6
  • PHOTO-2024-05-05-14-08-43.jpg
    PHOTO-2024-05-05-14-08-43.jpg
    33.3 KB · Views: 7
  • 4 pins.jpg
    4 pins.jpg
    178.9 KB · Views: 7
Its a somewhat common issue. The same has happened to me. Its an issue with the stalk itself, just needs changed out. Scary when it happened to me I must admit!