First Rotary Use!!

[Foxspeed]

Thing for me with a rotary is for the same price as a DA (just the machine)you can get a silverline rotary some swissvax cleaner fluid pro and a pad.

That's all you need for a cracking finish.

given the choice/change again i think i would go down this route and as shown practice on an old car or part of one :thumbup:

 

[Craig_B]

Thats what rotary i have the Silverline one. Bought in a kit with 3 megs pads and 2 polishes.

Had another bash this morning with a finishing pad and Megs Speed Glaze 80

Couple more pics from today and a video


Above: this is the untouched side, as you can see really swirly! at the top of the photo you can see where i have been practicing.


Above: Where i have removed the swirls. Ignore the dents, it is from a scrappy


Above: My attempt at a 50/50 :thumbup:


Above: A little video going from uncorrected side to corrected side! Was recorded on my iPhone4 so sorry for the quality

Comments/Critisim welcome!

:bounce:

 

[PB.200]

Looks good.

Just need to have a go on your car now.

Start light and be extra careful if any areas have been resprayed.

 

[Craig_B]

Looks good.

Just need to have a go on your car now.

Start light and be extra careful if any areas have been resprayed.

Yeah, on the panel i started off with the Megs 83, then today with the megs 80.

But will start with the Megs 80 speed glaze first on the car as this is the least cutting polish I have. I think it will do the work on my 197

Really enjoy it though, nothing better than seeing a before and after photo or 50/50 to see what you have done!